Soelnoid valves according to NAMUR serve the control of pneumatic actuators and are to be mounted directly on actuators with a NAMUR interface according to VDI/VDE 3845. You can use our monostable solenoid valves of the series MNF for standard applications. Our standard version has a wearless and maintenance-free air spring. It returns to its initial position in case of power failure. Furthermore we can provide also an execution with a mechanical spring, which forces the solenoid valve back into its initial position in case of power and pressure failure.
Usually 3/2-way solenoid valves are used on single-acting actuators and 5/2-way valves on double-acting actuators. Our standard series MNF can be used either way due to our innovative and well-functional reversing sealing
Our new limit switch box i-box has been designed for direct mounting on pneumatic part turn actuators. Its integrated and large visual indicatoin OPEN-CLOSED is clearly visible from a large distance. The housing made of Polyamide is suitable for applications outside of any explosive atmospheres. The large space at the bottom allows a mounting on large actuators with a shaft diameter of up to 32mm. With the delivered adaptor the i-box can be mounted on the shaft heights 20mm and 30mm. The only requirement is an actuator hole spacing of 80x30mm.
Our self-developed limit switch boxes provide an enclosure IP67 and are available in 3 different materials like Polyamid, Vestamid and Aluminum. In the basic-version the housings are equipped with a flat cover and a flat visual indication inside of the housing. We provide 2 different versions. Our economic version with a very strong, plastic bracket reinforced with fiber glass and our chemical version with our premium class stainless steel bracket MBHV. The mounting brackets are always included in the delivery. They are adjustable in height and length and match with all established hole patterns and shaft heights of standardized actuators after VDI/VDE 3845.